Using color printers, there are many problems when encountering errors, one of the most common errors is the clogged inkjet printer. So what is the reason why the inkjet printer is clogged as well as how to fix it, please read the instructions.
Clogged inkjet printer errors occur for many reasons, but one problem we often see is the refusal to take care of and clean the machine regularly or not cleaning the machine. And not only will there be a clogged inkjet printer error, but frequent failure to clean will cause huge consequences such as a blackened printer on the edge of the paper or even a printer smeared with ink.
Although the construction of inkjet printers is slightly different from color laser or monochrome printers, there are a few similar parts for you to refer to and find relevant repairs. To get rid of the clogged inkjet printer error as well as the above situation fixes please follow the following article,
Guide to fix clogged inkjet printer error
Causes of clogged inkjet printers
– The printer is not cleaned for a long time, there is a lot of dust clogging.
– Replace unsanitary ink, do not clean the cartridges.
– The inkjet print head is damaged over time or due to uncleaning.
– Using bad ink causes inkjet head blockage.
How to fix, fix clogged inkjet printer
Step 1: First we proceed to check the inkjet printer for clogging by opening the Start Menu and entering “Control Panel” and then accessing this Control Pannel management section.
Step 2: Next, we go to the Device and Printer section to proceed to access the clogged inkjet section.
Step 3: Then right-click on the clogged inkjet printer, select Properties , and then switch to the Maintenance tab , select Nozzle Check to conduct a color check.
During the run, you should not do anything else until the scanner is complete. If the scanner finishes showing instant strokes, it means that your head is good, and if the strokes are broken, it means that the inkjet head is damaged.
If the degree of damage is mild we can clean and check again, and if the damage is severe and even if it cannot be cleaned, the only way is to buy new equipment.
Broken inkjet head differentiators
– The test has a printing error that is missing the color range or part of the color.
– The printed parts are missing color gamuts, missing which strips the system will tell you where it is clogged or damaged.
– When printing, the details in the frame may be lost.
– Print out for pale colors, colors that do not match the picture.
https://thuthuat.taimienphi.vn/cach-sua-loi-may-in-phun-bi-tac-23931n.aspx
Through the above article, you can see that cleaning the printer is very important if you do not want to spend a lot of money and effort to repair such a printer. In addition, you should also try to check how much ink is left in the printer to be able to better monitor the condition of the printer equipment, partly protect the machine, increase the service life due to problems with ink running out, ink residue caused. Especially with inkjet printers, the ink testing in the printer has to be done more often, although this test is completely simple compared to conventional black and white printers.